Y28-Non-Scs, Cr At Mpp + 1 - Xerox 4215 Reference Manual

Y28—Non-SCS, CR at MPP + 1
XEROX MRP FAMILY COAX COMMAND REFERENCE
The n values 0 and 3 correspond to IBM parameters. The values
4 through 7 are implemented for compatiblity purposes with
other protocol converters.
This function is available in DSC LU3 mode, a non-SCS operation.
@Y28, n@
Implements an IBM RPQ and takes effect as soon as the
command is received. This function controls the printer action
when a carriage return (CR) occurs at the MPP+1.
n
This option only affects NON SCS printing, and corresponds with
the following:
IBM 3268 RPQ SC9501
•
IBM 3287 RPQ S30219
•
IBM 4214 OPT 15=1.
•
Example @Y28, 1@ sets the printer to stay on current line when a
Carriage Return (CR) is received at MPP+1.
Same print line
Next print line
Next print line
Last print line
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Values for n are:
0* Next character position is 1st Print
Position on next line, when a Carriage
Return (CR) is registered at MPP+1.
1 Next character position is 1st Print
Position on current line, when a Carriage
Return (CR) is registered at MPP+1.
Print position
1 2 3
ON
OFF
MPP+1
o Carriage
return here
Present form
Page boundary
Next form
3-29