Xerox 4215 Reference Manual page 146

CONFIGURATION AND RESOURCE UTILITY (MVS)
7-2
If you have created or modified the configuration descriptions or
user-created FSL members in a previous version of the Host
Utility, make sure you save the changes by copying the members
from your current CFGDLIB and from XMRPV.4220.UCRTLIB to
XMRP.V1R2M1.UCRTLIB after installing the new version of the
utility.
After the utility is updated, use the ISPF/TSO move or copy
option to restore the saved PDSs to the newly restored
XMRP.V1R2M1.CFGDLIB or XMRP.V1R2M1.UCRTLIB. The
previous versions of the PDS files may be deleted at the user's
discretion.
To start the installation of the Resource Utility:
1. Create a IEBCOPY JCL Job to load the JCL "LOADINST" from
your tape/cartridge to your DASD. The LOADINST JCL is the
first file on the tape/cart.
The IEBCOPY JCL to load the XMRP.V1R2M1.INSTALL PDS is as
follows:
000001 //XXXXXXXX JOB (UUUU),
000002 // 'UTILITY LOAD',CLASS=A,MSGCLASS=X,
000003 // MSGLEVEL=(1,1),NOTIFY=XXXXXXXX
000004 //*
000005 //LOD1 EXEC PGM=IEBCOPY,REGION=2048K
000006 //SYSPRINT DD SYSOUT=*
000007 //CART DD DISP=SHR,DSN=XMRP.V1R2M1.INSTAL,
000008 // UNIT=CART,LABEL=(1,SL,,,EXPDT=98000),
000009 // VOL=(,RETAIN,,,SER=XRX001)
000010 //TARGET DD DSN=XMRP.V1R2M1.INSTALL,
000011 // DISP=(,CATLG,DELETE),UNIT=3380,
000012 // SPACE=(3200,(14,2,5)),
000013 // DCB=(RECFM=FB,BLKSIZE=3200,LRECL=80),
000014 // VOL=SER=dddddd
000015 //SYSIN DD *
000016 COPY INDD=CART,OUTDD=TARGET
000017 /*
/*
• Change JOB statement as required to match your
installation standards (such as change XXXXXXXX to your
TSO High Level Qualifier and UUUU to your Account
Number.
• Change CART to TAPE if you are installing the Utility
from a tape.
• Change the dddddd to the VOLSER of the DASD unit on
which the UTILITY data sets are allocated.
• Change 3380 to the unit type of the DASD unit on which
the UTILITY data sets are allocated.
XEROX MRP FAMILY COAX COMMAND REFERENCE