Y26-Ff After Local Copy - Xerox 4215 Reference Manual

FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y26—FF After Local Copy
3-26
Example @Y25, 1@ sets Form Feed Before Local Copy.
@Y26, n@
Selects a form feed to be performed after local copy. It
determines the print position after a Local Copy (print screen
function).
The default is 0 for non-page printers, and 1 for page printers.
n
If n = 0 is selected, the printer defaults to Automatic Form Feed
at the end of the print buffer setting, or FSL Y33—Non SCS,
Automatic Function at End of Job command. If n = 1 is
selected, an automatic form feed is performed unless a Form
Feed command was the last command received, which means
the printer is set to print at position 1 of the first line of the next
page. Refer to the illustration given in the example.
Remember This option corresponds with the IBM 3268 RPQ SC9508 and the
IBM 3287 RPQ MC3750.
Print position
1 2 3
Same print line
Next print line OFF
Next print line
Last print line
ON
Values for n are:
0 No Form Feed Before Local Copy
1 Form Feed Before Local Copy is
performed.
XEROX MRP FAMILY COAX COMMAND REFERENCE
MPP+1
Start of
buffer
Present form
Page boundary
Next form