Y12-Set Default Paper Size - Xerox 4215 Reference Manual

FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y12—Set Default Paper Size
Utility
Yes 1
Yes 2
Yes 3
Yes 4
Yes 5
Yes 6
Yes 7
Yes 8
Yes 10 A3
Yes 11 Ledger
N/A 16 B5 Envelope
3-22
@Y12, n1 [,n2]@
Selects paper size. As with FSL Y11, a PCL5 command selects
the proper paper size. The table lists the supported paper sizes
and illustrates how they map to PCL5 for the MRP family of
printers. Also, the table identifies whether the AS/400 Utility
provides access to the paper size or whether the user-created
FSL must be used.
FSL parameter
A4
Legal
Letter
Executive
Monarch Envelope
Business 10 Envelope
DL Envelope
C5 Envelope
Example @Y12, 2@ sets the page size to legal.
Remember The setting for Y12 is not necessary. It is overwritten if Y119 is
enabled.
by Y119 overwrites any setting you provide to Y12.
Remember On the 4215/MRP and 4219/MRP, the size of the manual feed is
set to the default paper size. When the manual feed tray is used
for other sizes:
1. Disable Y119
2. Use the Y12 command to define the paper size for the
manual feed tray.
Remember If paper trays are not installed in the 4215/MRP or 4219/MRP, the
sizes defined for the missing trays are either letter or A4.
Remember For firmware release S11 116.010 and beyond, the values for Y12
(paper size) will be computed automatically for the user. You no
longer need to include a Y12 command to inform the interface
of the size of paper that is loaded in a tray. Previous versions of
the interface card would format data according to the paper size
PCL
4215/MRP and
parameter
4219/MRP
to Esc&I#A
26 A4 Tray, Manual
3 Legal Tray, Manual
2 Letter Tray, Manual
1 Manual
80 Manual
81 Manual
90 Manual
91 Manual
27 A3 Tray, Manual
6 Ledger Tray, Manual
100 Not Supported
The Automatic Papersize Configuration logic enabled
XEROX MRP FAMILY COAX COMMAND REFERENCE
4220/MRP
4230/MRP
Tray 1-5
Tray 1-5
Tray 1-5
Tray 1-3, 5
Tray 5
Tray 5
Tray 5
Tray 5
Tray 1-3, 5
Tray 1-3, 5
Not Supported