Y71-Create Translate Table; Y72-Reset Translate Table; Y73-Select Translate Table - Xerox 4215 Reference Manual

FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y71—Create Translate Table
Y72—Reset Translate Table
Y73—Select Translate Table
3-52
Programming a string where the ID number is marked with an '*'
causes the I/F to change to USER mode and all default strings are
disabled except where marked with a '+'.
To return to AUTO mode for a particular USER mode string
(marked *) the string is defined with no parameters.
Example 1 @Y62, 103, 1B'&1#C'@
@Y62, 104, 1B'&1#C'@
@Y62, 102, 1B'&1#C'@
@Y62, 112, 1B'&k#H'@
@Y62, 113, 1B'&k#H'@
@Y62, 114, 1B'&k#H'@
@Y62, 130, 1B'(s3B'@
@Y62, 131, 1B'(s0B'@
@Y62, 132, 1B'&d0D'@
@Y62, 133, 1B'&d@'@
To disable a string, end the FSL after the string number. Refer to
example 2.
Example 2 @Y62, 130@ disables string number 130.
@Y71,<table number>@
Although all translate tables are created at power up, this
function is only included due to compatibility with older
products and is ignored.
@Y72,<table number>@
Clears translate table changes, deletes a specified translate table,
and resets translate tables to default.
<table
number>
Example @Y72, 2@ resets Table 2.
@Y73,<table number>@
Causes the specified translate table to become active. To modify
a table, it must be active. The translate tables are illustrated in
tables A-1 through A-8 in the appendix.
The modification done by function Y75 (modify translate table) is
performed on the translate table that is selected with Y73.
Example @Y73, 2@ selects the Codepage 500 to PC 8 translate table.
Defines 6 LPI
Defines 8 LPI
Defines 4 LPI
Defines 10 CPI
Defines 12 CPI
Defines 15 CPI
Begin Bold
End Bold
Begin Underscore
End Underscore
Number that clears the indicated translate table
change to preserve memory in ranges 1 to 8
XEROX MRP FAMILY COAX COMMAND REFERENCE