Y92-Point Size Strings; Y93-Attribute Strings; Y94-Typeface Strings - Xerox 4215 Reference Manual

Y92—Point Size Strings
Y93—Attribute Strings
Y94—Typeface Strings
XEROX MRP FAMILY COAX COMMAND REFERENCE
Example 3 @Y91, 18, 0, 2, 1, 10@ is a syntax example in IBM Proprinter
mode with the following settings:
IBM GFID No.:
Typeface:
Attributes:
Symbol Set:
Point Size:
@Y92, n1@
Sets font point size in association with Function Y91, GFID/Font
Select Setup.
n1
Example @Y92, 01, 1B2873313056@ sets the point size to 10.
Refer to the "IBM GFID to PCL fonts attribute" appendix to
determine the point sizes for individual font names.
@Y93, n1@
Sets font attributes in association with Function Y91, GFID/Font
Select Setup.
n1
Example @Y93, 01, 1B28733342@ requests the bold attribute.
Refer to the "IBM GFID to PCL fonts attribute" appendix to
determine the symbol sets for individual font names.
@Y94 n1@
Sets font typeface in association with Function Y91—GFID/Font
Select Setup.
n1
Refer also to the "IBM GFID to PCL fonts attribute" appendix for
typefaces given for individual font names.
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
IBM GFID 18
Typeface No. 0
Italic
Symbolset 1
Point Size 10
User-defined setup for point size select strings
on the form <String No.>, <HEXdata>.
The valid string values are 1 to 8.
User-defined setup for attribute select strings on
the form <String No.>, <HEXdata>.
The valid string values are 1 to 8.
User-defined setup for symbol set select strings
on the form <String No.>, <HEXdata>.
The valid string values are 1 to 8.
3-61