Xerox 4215 Reference Manual page 166

CONFIGURATION AND RESOURCE UTILITY (MVS)
7-22
--------------------------XEROX RESOURCE UTILITY
---------------
---------------------------CHANGE CONFIGURATION
DESCRIPTION------------------
-----------------(Value 'NONE' does not create FSL for the
CFGD)-------------
NAME OF CONFIG DESCRIPTION = = =>
LINES PER INCH = = =>
CHARACTERS PER INCH = = =>
LINE SPACING = = =>
FORM LENGTH = = =>
MAXIMUM PRINT POSITION = = =>
CASE = = =>
PAGE FORMAT = = =>
PAPER PATH = = =>
NONE,TRAY1,TRAY2,TRAY3,TRAY4,TRAY5
PAP,MAN-ENV
PAPER SIZE = = => LETTER
NONE,LETTER,LEGAL,A4,EXEC,MON,
LINE OVERFLOW OPTION = = =>
DUPLEX PRINTING = = =>
FORM FEED BEFORE LOCAL CPY = = =>
In the Name of Configuration Description field, enter any 8-
alphanumeric name starting with an alpha character.
In the Name of User-created FSL field, enter any PDS data set
name or any physical sequential file. If the highest level qualifier
is the peron who is logged on, do not use apostrophes. If the
XMRP PDS is used, include apostrophes.
Press F8 to go to the second screen.
2nd screen The Change Configuration Description second screen displays:
--------------------XEROX RESOURCE UTILITY
--------------------------------
-----------------CHANGE CONFIGURATION
DESCRIPTION---------------------------
LAST LF ON PAGE SENT AS FF = = =>
FF AFTER TIME ELAPSE = = =>
USER HORIZONTAL MARGINS = = =>
INCH
USER VERTICAL MARGINS = = =>
INCH
NON-SCS PRINT IMAGE = = =>
NONE,NLSBOTH,NLS,TSI,TSIBOTH
I/F MEMORY CONTROL =.=.=>
Refer to Table 7-2 for a description of the function keys.
Ver 1.2.1
NAME
6 NONE,0,3,4,6,8
10 NONE,10,12,15,16,20,27
SINGLE NONE,SINGLE, DOUBLE
62 NONE,0 to 255
132 NONE,0 to 255
DUAL NONE,MONO,DUAL
PORT NONE,PORT,LAND,COR
TRAY 1
MIDDLE,UPPER,LOWER,MAN-
BUS,DL,C5,A3,LEDGER
TRUNCATE NONE,WRAP,TRUNCATE
SIMPLEX NONE,SIMPLEX,LONG SHORT
NO NONE,YES,NO
YES NONE,NO,YES
0 NONE,0 TO 255
NONE NONE,NUMBER IN 1440ths
NONE NONE,NUMBER IN 1440ths
NONE
NONE NONE,RSTUSR,RSTFCT,SAVUSR
XEROX MRP FAMILY COAX COMMAND REFERENCE