Y57-User-Defined String Before Local Copy; Y58-User-Defined String After Local Copy - Xerox 4215 Reference Manual

FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y57—User-defined String Before Local Copy
Y58—User-defined String After Local Copy
3-42
@Y57, <string number>@
Sets up the printer before local copy.
0 to 7
This function only affects operator initiated local copy, and not
host initiated copy. This function only affects local copy from
CUT screen terminals, and not from DFT terminals.
CUT screens are screen dumps in non-SCS, while Distributed
Function Terminal (DFT) screens are new screen dump in SCS.
This function is only used due to compatibility with older
products.
Example @Y57, 3, 5@ sends user strings 3 and 5 to the printer before
local copy.
@Y58, <string number>@
Sets up the printer after local copy.
0 to 7
This function only affects operator initiated local copy, and not
host initiated copy. This function only affects local copy from
CUT screen terminals, and not from DFT terminals. These strings
are defined by Y61—Setup for User-defined Strings.
This function is only used due to compatibility with older
products.
Example @Y58, 2, 4@ sends user strings 2 and 4 to the printer after local
copy.
One or more strings indicated on the form (n1),
(n2), . . . .(nx) in ascending sequence.
One or more strings indicated on the form (n1),
(n2), . . . .(nx) in ascending sequence.
XEROX MRP FAMILY COAX COMMAND REFERENCE