Y9-Set Default Print Quality - Xerox 4215 Reference Manual

FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y9—Set Default Print Quality
3-18
Example @Y8, 30@ sets the printer language to French 105 character set.
@Y9, n@
Selects current and default font under the Page Presentation
Media SCS command.
Refer to the "qq" parameter of the Page Presentation Media
(PPM) command in the "Page Presentation Media (PPM)" section
of the "DSC and SCS data stream commands" chapter for
detailed information on this parameter that specifies the print
quality.
n
Example @Y9, 2@ sets the printing at near letter quality.
Valid values for this parameter are:
0 No Print Quality command sent to printer
1* Draft quality
2 Near letter quality
3 Letter quality
4—65534 (See notes.)
Notes:
Use 0 with Impact Printers only. 0 is ignored
•
by all other printers.
Values 1 to 3 are passed to a GFID selection,
•
that can also be defined using FSL Y91
through Y94.. If no parameters are defined in
the Y62—Setup for IBM-defined Strings
command, nothing is sent to the printer.
(Refer to the Y62 command for additional
information.)
Values greater than 3 are paired to FSL 96.
•
XEROX MRP FAMILY COAX COMMAND REFERENCE