Confirming The Printer Connection To The Fiery Exp4110 - Xerox 4110 Configuration And Setup

In this location
Server Setup
Windows hosts file
Windows setup for
TCP/IP
UNIX /etc/printcap file (BSD)
Solaris
NetWare administration utility
Add New Server dialog box, when
configuring a utility
T
O CONFIRM THE PRINTER CONNECTION TO THE
T
ROUBLESHOOTING
For the appropriate name, see the following table.
For this item
Server Name option
host name
lpd host name
Name of printer on lpd
host machine
rp line
lpadmin queuename
print queues
(must be all lowercase
and in English)
New Device
Server Name
Confirming the printer connection to the Fiery EXP4110
1 Print a printer Test Page to verify the printer is functioning normally.
2 Turn off the printer and connect the interface cable from the printer to the Fiery EXP4110.
3 To confirm this connection, turn on the printer and the Fiery EXP4110, and print a Test Page
from the Fiery EXP4110 Control Panel.
To print a Test Page, press the Menu button on the Control Panel to display the Functions
menu. Choose Print Pages, and then choose Test Page.
4 With both the Fiery EXP4110 and the printer turned off, connect the network cable to the
Fiery EXP4110, as described in
The network should already be installed and operational.
5 Turn on the printer and then the Fiery EXP4110.
IPX/SPX networks
Administrator defines Administrator defines
name name
(TCP/IP host name)
(TCP/IP host name)
print, hold, or direct
print, hold, or direct
print, hold, or direct
_direct
_print
_hold
Utilities are not supported 4110
over IPX/SPX
Utilities are not supported DNS name
over IPX/SPX
(TCP/IP host name)
F EXP4110
IERY
Connecting to the Network.
TCP/IP networks
DNS name
DNS name
98
See
page 61
page 9
page 9
page 13
page 12
Utilities