A
DMINISTERING THE
T
O CHECK FOR SOFTWARE UPDATES FROM
1 In Command WorkStation, right-click FieryBar and select Set Up Fiery.
2 Type the Administrator password and click OK.
3 On the General Setup tab, click System Update.
4 Click Modify Settings.
5 Select Enable Automatic Update and choose a method for updating the Fiery EXP4110:
• Notify when updates are available.
• Download updates and notify.
• Install updates, which allows you to download and install updates on the Print Server.
Specify the Day and Time to restart the Print Server automatically after the updates
are downloaded.
6 If you use a proxy server to connect through a firewall to the Update server, select Enable
Proxy and enter the appropriate information:
•
Proxy server IP address
Address:
•
Port used by the proxy server
Port:
•
User name for accessing the proxy server
User:
•
Password for accessing the proxy server
Password:
F
EXP4110
IERY
L
OCAL SETUP
84