Printer Drivers - Xerox 4110 Customer Release Notes

Printer drivers

T
O CONFIGURE THE OPTIONS ON THE
Windows 2000 and LPR availability
When you perform a clean installation of Windows 2000 on a client computer, no LPR
services are available by default. Your only option is to print through a standard TCP/IP
port, or use SMB printing. However, if you convert a Windows NT 4.0 computer to
Windows 2000, LPR printing services are retained.
Creating an SMB port in Windows 2000/XP
To create an SMB port in Windows 2000/XP, you must first establish a connection to the
Fiery EXP4110 by its IP address. Choose Start and select Run. At the prompt, enter "\\"
followed by the Fiery EXP4110 IP address, and then click OK. After you make the
connection, follow the instructions to create an SMB port on Windows 2000/XP.
Banner Page on NetWare networks
We recommend that you disable the NetWare banner page. Instead, configure the
Fiery EXP4110 in PS Setup to use the Cover Page with each job.
User name on Cover Page from Netware
The Cover Page displays the complete NetWare context for the user name.
Configuring Windows printer drivers
To use the printer driver on Windows 2000/XP/Server 2003, you must first configure
the options on the Advanced tab of the printer driver after installation is complete.
1 Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printer and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.
2 Click the Fiery EXP4110 icon and choose Properties from the File menu.
3 Click the Advanced tab.
4 Select the following options:
• Spool print documents
• Start printing immediately
• Print spooled documents first
5 Deselect the following option:
• Enable advanced printing features
6 Click Apply to save your changes.
7 Click OK.
A
DVANCED TAB
Page 5
Part Number: 45051581