Setting Administrator And Operator Passwords; Setting Passwords; Passwords From The Control Panel - Xerox 4110 Configuration And Setup

A
DMINISTERING THE

Setting passwords

You can set or change the passwords for the Fiery EXP4110. Anyone with the Administrator
password can modify the Setup options, and control the flow and order of print jobs with the
job management tools.
Administrator
privileges.
Operator
For more information about Administrator and Operator passwords and the access privileges
they allow, see
Windows XP system password
When the Fiery EXP4110 is installed, the Administrator password is defined, but the
Operator password is not. The Administrator password allows a user to modify the Setup,
use the administrator functions in the job management tools, and run Setup. We strongly
recommend that you set at least an Administrator password to protect the Fiery EXP4110
from unauthorized changes to Setup.
Keep track of the passwords that you set. To remove a password that you cannot remember,
you must reinstall the system software.

Passwords from the Control Panel

From the Control Panel, you can change only the Administrator password. To change
the Operator password, use Configure or Command WorkStation, Windows Edition.
T A
O CHANGE THE DMINISTRATOR PASSWORD
1 Scroll the main Setup menu and choose Change Password.
2 Type and confirm the password, as follows.
New Password
Use the up and down arrow buttons to select the characters and the left and right arrow
buttons to move between them (see
Type characters from left to right; the left arrow button also serves as a Delete key.
The password can be any combination of letters and numbers up to 19 characters.
Verify New Password
Retype the new password, exactly as you typed it initially. The new password is in effect after
you save changes and restart the Fiery EXP4110.
F EXP4110
IERY
allows you access to Setup. Administrator privileges also include Operator
allows you access to job management functions of Command WorkStation.
page 16.
allows you access to the Fiery Advanced Controller Interface.
"Types of Setup screens" on page 29).
81