Clearing The Fiery Exp4110 - Xerox 4110 Configuration And Setup

A F EXP4110 86
DMINISTERING THE IERY

Clearing the Fiery EXP4110

The Clear Server command allows you to clear all queued print jobs from the Fiery EXP4110
Print, Hold, and Printed queues. Jobs can also be deleted, either individually or as a group,
using Command WorkStation. Clear Server also clears all jobs archived on the
Fiery EXP4110 hard disk, the index of archived jobs, and all FreeForm masters.
T F EXP4110
O CLEAR THE IERY
• In Command WorkStation, choose Clear Server from the Server menu.
Be sure to back up your original data on your own media at the same time you store and save
data on the Fiery EXP4110 hard disk. Never damage the Fiery EXP4110 hard disk, and do
not turn off the system while accessing the hard disk. For instructions on how to turn on and
turn off the Fiery EXP4110, see page 95.
If the Fiery EXP4110 hard disk or system software experiences technical difficulties, data
stored and saved on the Fiery EXP4110 hard disk may be irretrievably lost. If problems with
the hard disk occur, extended storage of the following data cannot be assured:
• Third-party fonts
• Print jobs
• Job notes and instructions
• Scanned image data
• Jobs edited with Impose
• Variable data documents
• E-mail Service Address Book
• Fiery EXP4110 configuration information (list of all the settings in effect for the current
Setup)