General/Server Options - Xerox 4110 Configuration And Setup

S F EXP4110 61
ETTING UP THE IERY FROM A NETWORK COMPUTER
3 Choose Setup from the Server menu.
Regardless of the remote Setup method you use, the following dialog box appears.
The remote Setup interface for Command WorkStation and Configure is identical. For
information about most remote Setup options, see Configure WebTools Help. Remote Setup
options that are not described in Help are described in this document.

General/Server options

You can specify Fiery EXP4110 system settings that affect all users, such as the name of the
Fiery EXP4110, system date and time, passwords, and Job Log printing.
allows you to assign a name for the Fiery EXP4110. This name appears in the
Server Name
Chooser on an AppleTalk network.
Do not use the device name ( ) as the server name. If you have more than one
N : 4110
OTE
Fiery EXP4110, do not assign them the same name.
sets the system date and time of the Fiery EXP4110. Press Set and enter the
Date and Time
correct date and time. You can also set the date and time automatically by specifying an
Internet time server.
see page 81.
Passwords
specifies whether the Fiery EXP4110 prints the Job Log
Auto Print Job Log Every 55 Jobs
after every 55 jobs. The Job Log lists the last 55 jobs processed on the Fiery EXP4110, with
accounting information about each one, including user name, document name, time and date
printed, number of pages, and other job information.
specifies whether the Fiery EXP4110 clears the Job Log after
Auto Clear Job Log Every 55 Jobs
every 55 jobs. If you do not select this option, the Fiery EXP4110 saves a file containing a
record of all jobs ever printed. Since this file takes up space on the Fiery EXP4110 hard disk,
clearing the Job Log frees up additional disk space.
requires users to enter the Administrator password before printing
Password Protect Job Log
or deleting the Job Log.