Xerox 4110 Configuration And Setup page 96

A
DMINISTERING THE
5 At the Log On to Windows dialog box, type Administrator in the user name field, type the
password, and the press Enter.
The password is case-sensitive and must be entered exactly.
6 Wait for FieryBar to appear on the monitor and reach Idle.
The Fiery EXP4110 takes approximately three minutes to power on and reach Idle.
F EXP4110
TO RESTART THE IERY
1 Verify that the Fiery EXP4110 is not receiving, processing, or printing any files.
If necessary, wait until Command WorkStation shows no processing or printing jobs in the
Active Jobs window, or FieryBar shows Idle in both the RIPping and Printing areas.
2 Close all open applications except FieryBar.
3 Right-click FieryBar and choose Restart Fiery from the menu that appears.
4 Click OK when the confirmation message appears
Wait for the Fiery EXP4110 server software to close down and restart. You may need to wait
one minute or more for the server software to restart. FieryBar displays the Exited status while
the server software restarts.
F EXP4110
IERY
96