Printer Setup Options - Xerox 4110 Configuration And Setup

Network Setup
Service Setup
Remote Access Setup

Printer Setup options

T
O ACCESS PRINTER SETUP OPTIONS
S F
ETTING UP THE IERY
Type the password for access to the LDAP server. This information is used if the
Password:
authentication method is Simple or GSSAPI. If you use GSSAPI authentication, the password
is encrypted when it is sent across the network.
Type the name of the domain in which the LDAP server exists. This information is
Domain:
used if the authentication method is GSSAPI.
Timeout (sec)
1-60 [15]
Specify the maximum amount of time to elapse before the Fiery EXP4110 stops attempting
to connect to the LDAP server.
Port
1-65535 [389]
Specify the port number.
Search Base
Specify the search base to search an LDAP server. The Fiery EXP4110 will search the area of
the directory specified by the search base.
Remote Access Setup
Enable Remote Access
Yes/No [No]
Select Yes to enable Remote Desktop, a Microsoft application that allows remote computers
to manage and control the Windows desktop features of the Fiery EXP4110
Exit Service Setup
This returns you to the main Network Setup menu. Choose Exit Network Setup.
Printer Setup configures the connections and printing behavior associated with a particular
printing device. For more information about Fiery EXP4110 print connections, see
1 Choose Printer Setup from the main Setup menu.
2 Enter the options appropriate to the printing requirements at the site.
3 When you have finished, save changes.
EXP4110 C
FROM THE ONTROL
P
ANEL
56
page 15.