Xerox 4110 Configuration And Setup page 73

Server & controller solutions
Hide thumbs Also See for 4110:
Table of Contents

Advertisement

S
F
EXP4110
73
ETTING UP THE
IERY
FROM A NETWORK COMPUTER
Port 9100 printing
enables applications to open a TCP/IP socket to the Fiery EXP4110 at
Enable Port 9100
Port 9100 to download a print job.
allows you to attach Port 9100 to any of the published Fiery EXP4110
Port 9100 Queue
print connections.
FTP Services
The FTP proxy that the Fiery EXP4110 supports uses the connection type
"target_username@target_system_name / target_username@target_ip_address". Other
connection types may not work properly. For details, consult your network administrator.
allows users to send jobs to an FTP server where other users can retrieve
Enable FTP Printing
them.
requires a valid user name and password to print a document.
Require Password for Printing
The user name and password must be authorized in the Member Printing list in Command
WorkStation.
allows you to specify the timeout.
Timeout (sec)
specifies the print connection on the Fiery EXP4110 to which FTP jobs
Default FTP Queue
are sent. In addition to the standard print connections hold and print, published virtual
printers are also listed.
E-mail/Internet Fax Service Setup
enables e-mail services (required for all e-mail/Internet Fax client
Enable E-mail Services
services).
allows print jobs sent via e-mail/Internet Fax to be accepted. If this
Enable Print via E-mail
option is cleared, print jobs sent via e-mail/Internet Fax are ignored.
allows you to assign the IP address or server name that communicates
Incoming Mail Server
the appropriate mail server and contact information to the Fiery EXP4110.
specifies the e-mail protocol used to communicate with the incoming mail server.
Server Type
allows you to assign the IP address or server name that communicates
Outgoing Mail Server
the appropriate mail server and contact information to the Fiery EXP4110.
You must define both an Incoming and Outgoing mail server. If an Outgoing mail
N
:
OTE
server is not defined, the E-mail Service assumes that the incoming and outgoing server names
are the same.
specifies the print connection on the Fiery EXP4110 to which
Print via E-mail Destination
e-mail jobs are sent.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fiery exp4110

Table of Contents