Setting Up The Fiery Exp4110 From A Network Computer; Accessing Setup; Local Setup From The Fiery Exp4110; Performing Fiery Exp4110 Setup - Xerox 4110 Configuration And Setup

S F EXP4110 59
ETTING UP THE IERY FROM A NETWORK COMPUTER
S F EXP4110
ETTING UP THE IERY FROM A NETWORK COMPUTER
To specify network settings and print option default settings, you must perform Setup. To use
any of the Setup applications, you must enter the Fiery EXP4110 Administrator password.
When you finish making changes, see "Exiting Setup" on page 75.

Accessing Setup

You can set up the Fiery EXP4110 in these ways:
For systems with the FACI. Local Setup uses a Windows XP Embedded control
Local Setup:
panel, Fiery Server Setup.
Performed from a network computer using Configure or
Remote Setup:
Command WorkStation, Windows Edition.
Both methods of Setup are similar. This chapter discusses primarily Local Setup. For
information about Remote Setup options, see Configure WebTools Help.

Local Setup from the Fiery EXP4110

Access local Fiery EXP4110 Setup in any of the following ways:
• Right-click FieryBar on the Windows XP Embedded desktop and choose Set Up Fiery.
• Right-click the Fiery icon in the Windows XP Embedded taskbar and choose Set Up Fiery.
• Start Command WorkStation and choose Setup from the Server menu.