Xerox 4110 Configuration And Setup page 49

S F EXP4110
ETTING UP THE IERY
Workgroup or Domain
If you choose No for Use Automatic configuration, enter the name of the workgroup
or domain.
Use WINS Name Server
Yes/No [No]
Broadcasts from SMB devices cannot pass across a router without a WINS name server.
Setting up the WINS name server is outside the scope of this document. To find out if a name
server is available, contact your network administrator.
WINS IP Address
[127.0.0.1]
This option appears only if you choose Yes for WINS Name Server. Change the default
address to the correct IP address for the WINS Name Server. Obtain the correct address from
your network administrator.
Point and Print Drivers
PS/PCL [PS]
Select the type of driver to download when setting up a printer for Windows printing.
Server Name
Default Name
The server name is the name that will appear on the network for accessing the Fiery EXP4110
via SMB. The default name is the same as the server name assigned in Server Setup (see
page 30).
Server Comments
Server comments (optional) can contain information about the printer. These comments are
listed in the Fiery EXP4110 Properties in Network Neighborhood and can be up to 15
characters.
Set Domain Name
Select from list/Enter manually [Select from list]
This option provides two ways to specify the workgroup or domain in which you want the
Fiery EXP4110 to appear. The Fiery EXP4110 may need to reboot in order to display the
current settings.
If you selected
Select From List
Choose Domain
List of domains
Select the workgroup or domain from
the list.
C
FROM THE ONTROL
: If you selected
Workgroup or Domain
Enter the name of the workgroup or domain.
For more information about entering text
and characters, see
on page 29.
P
ANEL
:
Enter manually
"Types of Setup screens"
49