Setting Passwords - Xerox Phaser EX7750 Configuration Manual

7
7-2 Administering the EX7750
For these operations
Getting users started
with printing
Controlling the job flow
Job accounting
Color management
Maintaining optimal EX7750
performance
Troubleshooting
And these tasks
Printing to the EX7750
Setting job-specific options
Using Fiery utilities
Using WebTools, Command WorkStation and Fiery
utilities and for managing job priorities, tracking current
jobs, canceling jobs, printing jobs in the Hold queue, and
reprinting from the Printed or Hold queue
Viewing, printing, and exporting the Job Log, user notes
Setting automatic printing and clearing for the Job Log
Printing with CMYK simulations
Printing color samples and swatch pages
Installing color profiles
Tips
Deleting jobs, clearing queues
Troubleshooting EX7750 Setup

Setting passwords

Passwords described in this section are not the ones for the Windows XP software
which you must enter through the FACI when the EX7750 is started or rebooted.
For Server processes, you can set or change the Administrator password from the
EX7750 Control Panel, and both Administrator and Operator passwords from local
Setup or remote Setup.
When the EX7750 is installed, the default Administrator password ("Fiery.1") is
already set on the EX7750. You are required to enter it when you run Setup or access
the job management tools with certain privileges.
For more information, see "Passwords" on page 3-3.
See
Printing Guide
Job Management Guide
Printing Guide
Job Management Guide
Release Notes
Job Management Guide
Color Guide
User Software Installation
Guide
page 7-18, also
Job Management Guide
Appendix A