Printer Setup Options - Xerox Phaser EX7750 Configuration Manual

4
4-44 Performing Setup from the Control Panel
Network Setup
Service Setup
T
O ACCESS PRINTER SETUP OPTIONS
1. Choose Printer Setup in the main Setup menu.
Exit Setup
Server Setup
Network Setup 2. Enter the options appropriate to the printing requirements at the site.
Printer Setup
Setup
3. When you finish, save your changes.
Exit Service Setup
This returns you to the main Network Setup menu. Choose Exit Network Setup.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in Network Setup; select No to return to the
main Setup menu without making any changes.

Printer Setup options

Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information about EX7750 print connections,
see "EX7750 print connections"
In the following list of options, default values, where applicable, appear in brackets.
For users to use the Fiery utilities and WebTools or print to the EX7750 over a
N :
OTE
TCP/IP network, you must publish at least the Hold queue or the Print queue.
on page 3-1.