Initialization Parameters - Xerox FaxCentre 2121 User Manual

Before worldwide transmission, you must:
• take out an Internet subscription from an Internet Service Provider (ISP),
• check that all initialization parameters correspond to those provided by the ISP,
• apply the correct settings, if needed, for the Internet connection.
Connect to the Internet via the ISP to send and receive fax-Internet or E-mails. Both
operations will be performed during an Internet connection.

Initialization parameters

Configure the settings needed to identify the machine on the Internet. The ISP will
provide these settings.
The parameters are divided in four categories:
• connection, identifies the dial up number, the connection identifier and the con-
nection password,
• message service, defines the message service identifier, the message service
password and the E-Mail address,
• servers, identifies the name of the IP address of Internet SMTP providers (send)
and POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The
server address is made up of 4 groups of 3 digits maximum, separated by dots,
• SMTP Authentication, used to activate the authentication protocol.
Access to connection and message service parameters
Select the Internet Service Provider (ISP) from the list NO ACCESS, PROVIDER 1,
PROVIDER 2, PROVIDER 3, PROVIDER 4, PROVIDER 5, PROVIDER 6 or
LOCAL NETWORK and press OK.
Choosing NO ACCESS disables access to Internet functions.
Enter the CALL NUMB., press OK.
Enter connection IDENTIFIER
Enter connection PASSWORD, press OK.
Enter Email IDENTIFIER, press OK.
Enter Email PASSWORD, press OK.
1. If the identifier has more than 16 characters, the text will automatically slide over to the
left.
M 921 OK - INTERNET / INIT PROVIDER / CONNECTION
1
, press OK.
M 922 OK - INTERNET / INIT PROVIDER / MESS. SERV
Setting the machine
M 91 OK - INTERNET / SUPPLIER
4-19