Call Monitoring; Stopping A Call In Progress; Call Reports And Logs - Xerox FaxCentre 2121 User Manual

Select the line in question (L1 or L2) using the
Press the
Note:
If a call is in progress on line L2 (2121L), only line L1 may be picked up
manually. In this case, the operation requested is performed without using
the menu described.

Call monitoring

If only one call is in progress on line 1 (L1)(2121) or line 2 (L2)(2121L), the following is
displayed:
L1: called number
TRANS. P1
If 2 calls are in progress, the on-screen display switches back and forward between the
following on the display's 2 lines:
L1: called number
TRANS. P1
and
L2: called number
TRANS. P1

Stopping a call in progress

If only one call is in progress on line L1 or line L2 (2121L):
Press the
Confirm the stopping of the call in progress by pressing the
This screen remains displayed for a maximum of 5 seconds.
If 2 call are in progress on line L1 and line L2:
Press the
Select the line in question (L1 or L2) using the
Press the
This screen remains displayed for a maximum of 5 seconds.

Call reports and logs

In the transmission and reception reports, the number of the call line used is always
indicated by Line 1 or Line 2.
key again to confirm your selection.
key.
key.
key again to confirm.
Setting the machine
and keys.
key again.
and keys.
4-17