Sntp Server Configuration - Xerox FaxCentre 2121 User Manual

These two addresses must be filled in for the Scan To Disk function.
Enter the IP address of each server, then press OK to confirm.

SNTP server configuration

The machine can automatically update the date and time when connecting to an Simple
Network Time Protocol (SNTP) server.
Server address
Enter the name of the SNTP server, then press OK to confirm.
This name can be in the form of an IP address, a Domain Name Server (DNS) address
or a NetBIOS name.
Server port
Enter the server port number, then press OK to confirm.
The port by default is port 123.
Activating the server access
To activate the SNTP server, select WITH using the
press OK to confirm.
Time zone
Select the local time zone using the
confirm.
Activating the automatic summer time management (Menu 212), automatically starts
the TIME ZONE setting.
M 2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1
M 2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2
M 2541 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
M 2542 OK - SETUP / NETWORKS / SNTP SERVER / PORT
M 2543 OK - SETUP / NETWORKS / SNTP SERVER / STATE
M 2544 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
and
and navigation keys, then
navigation keys, then press OK to
Setting the machine
4-13