Safety Standards - Xerox FaxCentre 2121 User Manual

• Never push objects of any kind into the slots of the product as they may touch
dangerous voltage points or short out parts which could result in a fire or electric
shock.
• Never spill liquid of any kind on the product.
• Never remove covers or guards that require a tool for removal, unless directed to do
so in a Xerox approved maintenance kit.
• Never defeat interlock switches. Machines are designed to restrict operator access
to unsafe areas. Covers, guards and interlock switches are provided to ensure that
the machine will not operate with covers opened.
• Do not put your hands into the fuser area, located just inside the exit tray area, as
you may be burned.
• This equipment is to be used on an appropriate branch circuit/electrical outlet. If this
machine needs to be moved to a different location, contact a Xerox service
representative or your authorized local representative or service support
organisation.
• If any of the following conditions occur, switch off the power to the machine
immediately and disconnect the power cable from the electrical outlet. Call an
authorized local service representative to correct the problem.
– The equipment emits unusual noise or odours.
– The power cable is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device has been tripped.
– Liquid is spilled into the copier/printer.
– The equipment is exposed to water.
– Any part of the equipment is damaged.
Quality Standards: The product is manufactured under a registered ISO9002 Quality
system.
If you need additional safety information concerning this XEROX product or XEROX
supplied materials you may call the following number:
EUROPE: +44 (0) 1707 353434
USA/CANADA: 1 800 928 6571

Safety Standards

EUROPE: This XEROX product is certified by the following Agency using the Safety
Standards listed.
Agency: TUV Rheinland
Standard: IEC60950
Safety & Environment
1-3