Installing the original document output tray
Insert the document output tray into the two slots located just below the control panel
on the front of the machine.
Loading paper
Move the paper size guide to one side.
Place a stack of paper into the tray. In case of letterhead paper, be sure to place the
paper printed side up.
Secure the stack of paper by pushing the paper size guides against the right and left
edges of the stack.
Supported types of paper:
Auto-feed cassette 60 to 90 g/m
Manual feed tray 60 to 160 g/m
2
/ 16 to 24 lb
2
/ 16 to 43 lb
Installing your machine
2-9