Xerox FaxCentre 2121 User Manual page 56

Setting the machine
With the keys
and press OK.
1 - SCANNING
MODE
3 - TX SPEED
4 - ECHO PROTECT
6 - EPT MODE
7 - COM. DISPLAY
8 - ECO ENERGY
10 - RX HEADER
11 - RX SPEED
12 - RINGS
13 - DISCARD Size
20 - E.C.M.
4-8
or , modify the parameter settings by following the table below
Parameter
1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO
1 - 33600
2 - 14400
3 - 12000
4 - 9600
5 - 7200
6 - 4800
7 - 2400
1 - WITH
2 - WITHOUT
1 - WITH
2 - WITHOUT
1 - SPEED
2 - PAGE
NUMBERS
1 - WITHOU
2 - DELAY 5 MIN
3 - DELAY 15 MIN
4 - DELAY 30 MIN
5 - STDBY
PERIODS
1 - WITH
2 - WITHOUT
1 - 33600
2 - 14400
3 - 9600
4 - 4800
5 - 2400
2 to 5
1 - WITH
2 - WITHOUT
1 - WITH
2 - WITHOUT
Setting
Default value of the scan mode resolution for
the documents to be transmitted.
Transmission speed for outgoing
documents.
To ensure line quality, select the maximum
speed available.
It may be necessary to restrict the
transmission speed for some calls.
If this parameter is on, the on-line echo will
be reduced during long distance calls.
For some long distance calls (satellite), the
on-line echo may disturb the call.
Choose between displaying transmission
speed or number of the page in progress.
Choose the machine standby delay: the
machine will switch to standby after a period
(in minutes) of inactivity.
If this parameter is on, all documents
received by the fax will include the sender's
header with their name, number (if available)
fax print date and the page number.
Transmission speed for incoming
documents.
To ensure line quality, select the maximum
speed available.
It may be necessary to restrict the
transmission speed for some calls.
Number of rings to automatically start the
machine.
Defines the threshold beyond which the
extra lines are printed on a second page.
Below this threshold, extra lines are deleted.
This parameter helps correct the calls made
on bad telephone lines. It is used when the
lines are weak or too noisy. Transmission
times may be longer.
Description