Cleaning - Xerox FaxCentre 2121 User Manual

Xerox faxcentre 2121: user guide
Hide thumbs Also See for FaxCentre 2121:
Table of Contents

Advertisement

Once the chip card has been read, the display shows:
DRUM OK
REMOVE CARD
Remove the card.
CAUTION:
If the following message is displayed, check that you have inserted
the chip card the right way up.
CANNOT READ CARD
REMOVE CARD

Cleaning

Cleaning the printer
Dust, dirt and paper debris can affect printer performance. Clean the printer regularly.
CAUTION:
Use a soft cloth to clean the printer. Never use abrasive or corrosive
detergents.
CAUTION:
The fusing unit can become very hot during operation. To avoid
injury - do not touch. Wait for at least 10 minutes after the printer has been turned
off and make sure that the fusing unit has cooled down before cleaning the
inside of the printer.
Clean the outside of the printer with a soft cloth.
Maintenance
7-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Faxcentre 2121l2121mb - faxcentre 2121 b/w laser

Table of Contents