Dial the number of the recipient (mobile phone or any other SMS-compatible device)
in one of the following ways:
• dial the number by means of the numerical keypad,
• enter the first letters of the recipient name,
• press the
betical order),
• press the
you have sent an SMS to, use the
The SMS may be sent to only one person or to several people. To send an SMS:
• to only one person, press the
• to several people:
- press the
- repeat the operations as many times as required (10 people max.). Press the
key to confirm.
SENDING SMS is displayed as the SMS is being sent.
Once SENDING SMS is no longer displayed, the SMS has been sent and the recipient
number is saved (
• If SMS appears, then the SMS has been put on hold and a further attempt will take
place a couple of minutes later. To immediately execute or cancel transmission,
refer to Transmission waiting queue on page 6-10.
• To check the SMS has been sent properly, print the transmission/reception log
(M 52 OK - PRINT / LOGS, p. 3-7).
Erase an SMS
Proceed as follows to erase an SMS:
Select the messages to erase.
Select SELECTION using the
Select a message using the
Erases messages already read.
Select MESSAGES READ using the
Press OK to confirm.
key until the required name appears (names are classified in alpha-
key to display the required name. The screen displays the last person
key to confirm,
key and enter the next person's name,
key).
M 431 OK - SMS SERVICE / DELETE SMS / SELECTION
and
and
M 432 OK - SMS SERVICE / DELETE SMS / SMS READ
or
keys to select a different number.
M 43 OK - SMS SERVICE / DELETE SMS
keys and press OK to confirm.
keys and press OK to confirm.
and
keys and press OK to confirm.
Setting the machine
4-27