Assembly
Choose the copy type between ASSEMBLED or NOT ASSEMBLED.
Press OK to confirm.
Origin
Change the orientation of the scanner.
Enter new values of X and Y given in mm (X < 210 and Y < 286) to move the scanning
zone as shown on the figure below:
Select the X and Y coordinates with the
Set the required coordinates with the numeric keypad or
Press OK to confirm the settings.
Contrast
Set the desired contrast with
Press OK to confirm the settings.
Brightness
Set the desired brightness with
Press OK to confirm the settings.
Margins
Shift the side margins of the document to the left or to the right:
Adjust the left / right margins shift (in steps of 0.5 mm) with
Press OK to confirm the settings.
Scanned area
Top view: scanned side down
or
keys.
or
.
or
.
Operation
or
.
or
.
6-15