Safety Notes; Introduction - Xerox LF8040.8045 User Manual

Table of Contents

Advertisement

Safety Notes

Introduction

Read these safety notes carefully before using this product to make sure you operate the equipment safely.
Read these safety notes carefully before using this product to make sure you operate the
equipment safely.
Your Sagem product and recommended supplies have been designed and tested to meet
strict safety requirements. These include safety agency approval, and compliance to estab-
lished environmental standards. Please read the following instructions carefully before oper-
ating the product and refer to them as needed to ensure the continued safe operation of your
product. The safety and environment testing and performance of this product have been ver-
ified using Sagem materials only.
Warning: Any unauthorized alteration, which may include the addition of new functions or
connection of external devices, not specifically approved by Sagem may impact the product
certification. Please contact your authorized Sagem Service Provider for more information.
Warning Markings
Warning Markings
All warning instructions marked on or supplied with the product should be followed.
DANGER!
This Warning alerts users to areas of the product where there is the possibility of per-
sonal injury.
Power Supply Plug with Protective Earth Pin
Power Supply
This product shall be operated from the type of electrical supply indicated on the product's
data plate label. If you are not sure that your electrical supply meets the requirements, please
consult your local power company for advice.
Warning: This product must be connected to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. This plug will fit only into
an earthed electrical outlet. This is a safety feature. If you do not know whether an outlet is
grounded, consult a qualified electrician.
Operator Accessible Areas
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only. Operator ac-
cess to hazardous areas is restricted with covers or guards, which would require a tool to re-
move. Never remove these covers or guards.
Maintenance
DANGER!
Safety Notes · Introduction ¦ 9
1

Advertisement

Table of Contents
loading

Table of Contents