Safety Notes - Xerox F110 - FaxCentre B/W Laser User Manual

6

Safety Notes

Read these safety notes carefully before using this
product to make sure you operate the equipment
safely.
Your Xerox product and recommended supplies have
been designed and tested to meet strict safety require-
ments. ese include safety agency approval, and
compliance to established environmental standards.
Please read the following instructions carefully before
operating the product and refer to them as needed to
ensure the continued safe operation of your product.
e safety and environment testing and performance
of this product have been verified using Xerox materi-
als only.
Warning: Any unauthorized alteration, which may
include the addition of new functions or connection
of external devices, may impact the product warranty.
Please contact your authorized Service Provider for more
information.
Warning Markings:
All warning instructions marked on or supplied with the
product should be followed.
Æ
Warning: is WARNING alerts users to areas of the
product where there is the possibility of personal injury.
Electrical Supply
is product shall be operated from the type of electri-
cal supply indicated on the product's data plate label. If
you are not sure that your electrical supply meets the
requirements, please consult your local power company
for advice.
Warning: This product must be connected to a
protective earth circuit.
is product is supplied with a plug that has a protec-
tive earth pin. is plug will only work in a grounded
electrical outlet. is is a safety feature. To avoid risk
of electric shock, contact your electrician to replace the
electrical outlet if you are unable to insert the plug into
it. Never use an earthed adapter plug to connect the
product to an electrical outlet that lacks an earth con-
nection terminal.
Operator Accessible Areas
is equipment has been designed to restrict operator ac-
cess to safe areas only. Operator access to hazardous areas
is restricted with covers or guards, which would require a
tool to remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be
described in the customer documentation supplied with
the product. Do not carry out any maintenance proce-
dures on this product which are not described in the
customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from
the electrical outlet. Always use materials specified for
this product. e use of other materials may result in
poor performance and may create a hazardous situation.
Do not use aerosol cleaners, they may be explosive and
flammable under certain circumstances.
WARNING - Electrical Safety Information
• Only use the power cord supplied with the equip-
ment.
• Plug the power cord directly into a grounded electrical
outlet easily accessible. Do not use an extension cord. If
you do not know whether an outlet is grounded, con-
sult a qualified electrician.
• is equipment is to be used on a branch circuit that
has larger capacity than rated ampere and voltage of
this machine. See data plate on the rear panel for the
rated ampere and voltage of this equipment.
• Improper connection of the equipment-grounding
conductor can result in an electric shock.
• Do not place this equipment where people might step
on or trip over the power cord.
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical in-
terlocks.
• Do not obstruct the ventilation openings.
• Never push objects of any kind into slots or openings
on the equipment.
• If any of the following conditions occur and discon-
nect the power cord from the electrical outlet. Call an
authorized local service representative to correct the
problem.
– e equipment emits unusual noises or odors.
– e power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other
safety device has been tripped.
– Liquid has spilled into the equipment.
– e equipment is exposed to water.
– Any part of the equipment is damaged.
Disconnect Device: e power cable is the disconnect
device for this equipment. It is attached to the back of
the machine as a plug-in device. To remove all electrical
power from the equipment, disconnect the power cable
from the electrical outlet.
LASER SAFETY INFORMATION
CAUTION: Use of controls, adjustments or perfor-
mance of procedures other than those specified herein
may result in hazardous light exposure.
With specific regard to laser safety, the equipment com-
plies with performance standards for laser products set
by government, national and international agencies as a
Class 1 laser product. It does not emit hazardous light, as
Chapter Safety Notes