Xerox 2101 Configuration Manual page 93

4
4-37 Network Setup options
Password
Enter the password for the e-mail account.
Administrator E-mail User Name
Enter the administrator name of the administrator e-mail account. This is typically the
part of the e-mail address that precedes the @ symbol. For example, in the address
pat@test.com
Administrator E-mail Domain Name
Enter the name of the domain in which the administrator has an account. This is
typically the part of the e-mail address that follows the @ symbol. For example, in the
address
pat@test.com
The administrator authorizes a unique e-mail address to remotely administer the
E-mail Services via e-mail. This includes the Fiery Address Books, designed for use in
controlling user access to E-mail Services. If an error occurs while you are executing a
job via e-mail, the e-mail service sends an error message to that administrator e-mail
address. The administrator can authorize additional e-mail addresses as administrators
from this e-mail address.
Timeout (sec)
30–300 [60]
Enter the length of time, in seconds, that the Fiery EX2101 should try to connect to
each e-mail server before determining that the connection is unsuccessful.
Polling Interval (sec)
1–3600 [15]
If you have enabled auto-checking for new messages in the previous option, enter
the interval in seconds at which the Fiery EX2101 should automatically check for
new e-mail.
, the administrator e-mail user name is
, the domain name is
.
pat
.
test.com