Commands - Xerox 2101 Configuration Manual

7
7-13 Using FieryBar

Commands

Right-clicking FieryBar allows you to access many Fiery EX2101 features. You can
choose the following commands from the menu that appears:
Command
WorkStation
Setup Fiery
Restart Fiery
Clear Server
Cancel Processing
Cancel Print
Suspend Print
Resume Print
Run Diagnostics
Log Off Windows
Starts Command WorkStation. For information about
using the features of Command WorkStation, see the Job
Management Guide.
Enters the Setup menus for the Fiery EX2101. See
Chapter 4.
Restarts the Fiery EX2101 system software without
rebooting the entire system. Network access to the
Fiery EX2101 is temporarily interrupted and all currently
processing jobs are aborted and might be lost. Choose
Restart Fiery instead of using the power or reset buttons
on the front of the Fiery EX2101.
Clears all jobs in all server queues and all jobs archived on
the Fiery EX2101 hard disk. Check with the site
administrator before choosing Clear Server.
Cancels the job currently processing on the
Fiery EX2101.
Cancels the job currently printing on the Fiery EX2101.
Suspends communication between the Fiery EX2101 and
the copier. To continue printing jobs from the
Fiery EX2101, choose Resume Print.
Resumes communication between the Fiery EX2101 and
the copier after you have chosen Suspend Print.
Allows you to run diagnostics on the following:
• Test Email —Tests the ability of the Fiery EX2101 to
print a log of all jobs sent using the e-mail printing
feature.
Allows you to log on to Windows XP as a different user.