Xerox 2101 Configuration Manual page 76

4
4-20 Performing Setup from the Control Panel
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup
Domain Name
Enter the domain name of your DNS server.
Host name
Default server name
Enter the host name of the Fiery EX2101. By default, the host name is Server Name
you enter in Server Setup.
Choose Exit Setup from the main Setup menu when you have finished making Setup
changes. The Fiery EX2101 will restart. All changes will be saved on restart.
IPX/SPX Setup options
To specify the frame types the Fiery EX2101 uses for IPX/SPX protocols, choose
IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame
type to enable IPX/SPX protocols. The Fiery EX2101 supports the following frame
types for IPX/SPX:
• For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
With this protocol
AppleTalk
TCP/IP with Ethernet
And these printing services
PAP (Printer Access Protocol)
LPD (Line Printer Daemon)
This frame type is
automatically enabled
Ethernet SNAP
Ethernet II