About Setup; Local Setup From The Fiery Ex2101 - Xerox 2101 Configuration Manual

3
3-8 Preparing for Fiery EX2101 Setup

About Setup

Setup configures the Fiery EX2101 to communicate with other devices and manage
print jobs. You must perform Setup the first time you turn on the Fiery EX2101 after
new system software is loaded. An initial Setup using default settings is adequate for
allowing users to print to the Fiery EX2101 and use the Fiery WebTools. When your
network or user printing environment changes, you can change Setup options
accordingly.
The first time you perform Setup, you must use the Fiery EX2101 Control Panel.
Configure, at a minimum, Server Setup, Network Setup, and Printer Setup, in that
sequence. After the initial Setup, you can change Setup options from the Control Panel
(see "Fiery EX2101 Control Panel"
"Accessing Setup"
Configuring and monitoring the Windows XP functions on the Fiery EX2101
N :
OTE
require the FACI. For more information, contact your authorized service/support
technician.
The FACI is available as an option.
N :
OTE
If you do not configure the remaining Setups, the Fiery EX2101 uses default settings.
You need to make settings appropriate for the printing environment at your site.

Local Setup from the Fiery EX2101

You can also perform Setup locally at the Fiery EX2101, using Setup from FieryBar.
Some of the settings you specify in Setup configure the Server process (such as print
job defaults), while some configure the Windows XP Workstation environment (such
as system date and time). Depending on the settings you change in Setup, you must
restart FieryBar or Windows XP before your changes take effect.
Setup options for local Setup are divided into three groups:
General Setup
Network Setup
Printer Setup
on page 4-3) or Command WorkStation (see
on page 5-1). You can set most Setup options using these methods.
System settings, passwords, and Job Log options
All the active network system settings that transmits print jobs
to the Fiery EX2101 and available services
Fiery EX2101 print connections to be made available to users,
and PostScript and PCL defaults for jobs