Chapter 6: Configuring Fiery Webtools; Configuring The Fiery Ex2101 And Clients For Fiery Webtools - Xerox 2101 Configuration Manual

6
6-1 Configuring the Fiery EX2101 and clients for Fiery WebTools
Chapter 6:
Configuring
Fiery WebTools
T
O SET UP
1. In Fiery EX2101 Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery EX2101, and then set the subnet mask.
3. Enable Web Services.
4. In Fiery EX2101 Printer Setup, confirm that the Print queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
Fiery WebTools allow you to manage your Fiery EX2101 remotely from the Internet
or from your company's intranet. The Fiery EX2101 has its own home page, from
which you can select a variety of functions, including Status, WebLink,
WebDownloader, WebSetup, WebSpooler, and Installer.
For more information on using Fiery WebTools, see the
Configuring the Fiery EX2101 and clients for
Fiery WebTools
Fiery WebTools provide access to many Fiery EX2101 functions via the Internet
(or intranet), providing additional flexibility in remote management. You can access
the Fiery WebTools from a Windows or Mac OS computer.
F W T
IERY EB OOLS ON THE
Set a gateway address, if required.
F W T
IERY EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information on supported browsers and Fiery
WebTools requirements, see the
F EX2101
IERY
Quick Start Guide.
Printing Guide.