Xerox 2101 Configuration Manual page 30

2
2-6 Setting up Network Servers
Configuring clients of a Windows NT 4.0/2000/2003 server
Each client of a Windows NT 4.0/2000/2003 server is already using a network
protocol to communicate with the server. Each client can print to the Fiery EX2101 if
it has been shared by a Windows NT 4.0/2000/2003 server or Windows NT 4.0
/2000/XP/2003 clients. In that case, the client does not have to use the same network
protocol to connect to the Windows NT 4.0/2000/2003 server as the server uses to
communicate with the Fiery EX2101.
T
O CONNECT AND PRINT TO THE
W NT 4.0/2000/2003
INDOWS
• Windows 98/Me: Before printing, double-click the Windows NT 4.0/2000/2003 server
icon in the Network Neighborhood window, and then double-click the printer name.
You are prompted to set up the printer. When you choose to set it up, the Add Printer
Wizard dialog box appears. Follow the procedures in the
Installation Guide.
• Windows NT 4.0: Before printing, connect to the print server computer and select the
Fiery EX2101. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
• Windows 2000/XP/2003: Before printing, install the printer driver with the
User Software CD and configure the port.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties appear dimmed, and unavailable for changing.
When a client chooses Print, the job is transmitted to the Windows NT 4.0
/2000/2003 print server, and from there to the selected print connection on the
Fiery EX2101. The job is listed in the Print Manager on the client workstation, and
the administrator can track it in the Fiery EX2101 window of the Print Manager on
the Windows NT 4.0/2000/2003 print server.
F EX2101
IERY SHARED BY A
SERVER
User Software