Xerox 2101 Configuration Manual page 174

For xerox 2101
Hide thumbs Also See for 2101:
Table of Contents

Advertisement

A
A-2 Troubleshooting
After this Setup screen
Frame Type selection
(Network Setup>Protocol
Setup>IPX/SPX Setup)
Enable NDS
(Network Setup>Service
Setup >PServer
Setup >NDS Setup)
Select NDS Tree
(Network Setup>Service
Setup >PServer Setup >
NDS Setup)
Navigating NDS tree
(Network Setup>Service
Setup >PServer Setup >
NDS Setup)
Bindery Setup
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
This message
Invalid frame size.
Warning! IPX network
number is zero.
No NDS trees found.
Warning! Selecting a new
NDS tree deletes
Bindery setup.
___ is empty.
If you also plan to use NDS,
set up NDS before Bindery.
Means
The network hub is not connected to a Novell server when
the Fiery EX2101 tries to bind.
No other IPX machine can be found on the network, or
the network hub is not connected to the network when the
Fiery EX2101 tries to bind. When this occurs, the network
number defaults to zero.
No NDS trees were found on the Novell network. Check
to see that the frame types on the Fiery EX2101 are
properly configured.
You have previously connected the Fiery EX2101 to a
different NDS tree. NetWise supports only a single NDS
tree connection. To avoid a potential conflict with an
existing tree connection (for example, if the connection
was made through a NetWare 4.x server in emulation
mode), all bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
(Delete Bindery setup and continue?), bindery settings are
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press Menu, or
select OK and choose No in the following message (Delete
Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fiery ex2101

Table of Contents