Xerox 2101 Configuration Manual page 46

3
3-2 Preparing for Fiery EX2101 Setup
In addition, you can enable the Printed queue, which is a storage area for the most
recent jobs from the Print queue. The Printed queue makes it convenient to reprint
those jobs. In Setup, you can enable the Printed queue and specify the maximum
number of jobs retained in the queue (see
queue requires the job management tools.
To use the Fiery utilities and Fiery WebTools, you must enable at least one print
connections.
Hold queue
Jobs sent to the Hold queue are spooled to the Fiery EX2101 hard disk for printing at
a later time or for reprinting. Because the Hold queue is a storage area, jobs sent to it
cannot proceed through the printing process until the operator intervenes using the
job management tools (see the
Print queue
This is the standard Fiery EX2101 queue. Jobs sent to the Print queue are processed
and printed in the order they are received. Jobs prioritized by an operator with the job
management tools and jobs sent via the Direct connection take priority over jobs sent
to the Print queue.
Direct connection
The Direct connection transmits jobs directly to the Fiery EX2101, but only when the
Fiery EX2101 is Idle. If the Fiery EX2101 is busy, the job remains at the user
workstation until the Fiery EX2101 is ready. The job is then processed as soon as the
previous job is finished and before the next queued job is processed.
Jobs sent to the Direct connection are not stored on the Fiery EX2101 hard disk, and
cannot be selected for reprinting, moving, or deletion. Jobs sent to the Direct
connection do appear in the Job Log, for accounting purposes.
To download fonts to the Fiery EX2101, you must publish the Direct
N :
OTE
connection.
The Direct connection is not supported for LPR printing.
N :
OTE
page 4-13). Reprinting jobs in the Printed
Job Management Guide).