Xerox 2101 Configuration Manual page 119

5
5-13 Network Setup
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
The Fiery EX2101 requires a unique, valid IP address. You can set a static address
or specify that the Fiery EX2101 use DHCP or BOOTP to obtain IP addresses
automatically.
If you specify the DHCP or BOOTP protocol, the Fiery EX2101 restarts when
N :
OTE
you save your changes and exit Setup. Allow the Fiery EX2101 to restart and return to
Idle before printing a Configuration page or proceeding with any other operations.