Restart The Fiery Ex2101 - Xerox 2101 Configuration Manual

7
7-15 Starting and shutting down the Fiery EX2101
Diagnostic messages appear on the Fiery EX2101 Control Panel. If any diagnostics
fail, more information and instructions appear. If the Fiery EX2101 encounters
problems while running the diagnostics, contact your service representative. The
Fiery EX2101 continues starting up and displays the message Idle when it is ready to
receive data.
If an Administrator password has been set, you must enter it to access Setup.
N :
OTE

Restart the Fiery EX2101

Use the following procedure to restart the Fiery EX2101, rather than using the power
switch on the back of the Fiery EX2101.
Restart Server restarts the Fiery EX2101 system software without shutting down the
Fiery EX2101 operating system.
T F EX2101
O RESTART THE IERY
1. Make sure the Fiery EX2101 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2. Press the Menu button to display the Functions menu.
3. Use the down arrow button to scroll to the last screen, and choose Shut Down.
4. Use the line selection button to choose Restart Server.
To access the FACI, if installed, you must enter the user name and the password at the
FACI. The user name is , and the default password is "
Administrator
Power switch
".
Fiery.1