Xerox 2101 Configuration Manual page 68

4
4-12 Performing Setup from the Control Panel
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time appears on the Job Log.
Print Start Page
Yes/No [No]
Specify whether the Fiery EX2101 should print a start page every time it restarts. The
start page displays information about the Fiery EX2101, including the server name,
current date and time, amount of memory installed in the Fiery EX2101, network
protocols enabled, and connections published.
Use Character Set
Macintosh/DOS/Windows [Macintosh]
Specify whether the Control Panel and Command WorkStation should use the
Macintosh, DOS, or Windows character set for displaying file names. This is
important if file names include accented or composite characters (such as é or æ).
For mixed-platform networks, choose the option that gives the best overall
representation of the special characters you use.
Enable Printing Groups
Yes/No [No]
Specify whether to enable printer groups for Member Printing. If you are
downloading fonts, set this option to No. If you enable this option, you must use
Command WorkStation to define user groups and passwords. Users must then
enter their group name and password when they print.
Enable Printed Queue
Yes/No [Yes]
Specify whether to enable the Printed queue, which creates a storage location on
the Fiery EX2101 hard disk for recent jobs that were printed from the Print queue.
Users with Administrator or Operator access to the job management tools can reprint
jobs from the Printed queue without resending them to the Fiery EX2101. If you select
No, jobs are deleted from the Fiery EX2101 disk immediately after they are printed.