Xerox 2101 Configuration Manual page 28

2
2-4 Setting up Network Servers
T F EX2101
O ADD THE IERY
W NT 4.0/2000/2003
INDOWS
1. Register the IP address of the Fiery EX2101 in the host name database used by
your system.
For installations that do not have a network administrator or central host name
database, add the Fiery EX2101 to the
server. Also add it to the
will use the Fiery utilities.
The Windows NT 4.0/2000/2003
file. The
hosts
has the same format as the
entry is:
IP Address<TAB>host name<TAB>#comments
where <TAB>
To determine the IP address and server name of your system, print a Configuration
page (see "Printing a Configuration page from the Control Panel"
If the Fiery EX2101 has already been defined in an
N :
OTE
host name database on a UNIX workstation on your network, we recommend that you
use the same host name here as you used for the name of the remote printer in the
/etc/printcap
2. Perform Fiery EX2101 Setup to support TCP/IP printing.
Enter the options in Protocol Setup (IP address of the Fiery EX2101, subnet mask,
and gateway address).
TCP/IP
TO A NETWORK WITH A
SERVER
hosts
file on any workstations that have TCP/IP loaded and
hosts
hosts
file is used as a local Domain Name Services (DNS) equivalent. It
hosts
file on UNIX servers. The format of the hosts
/etc/hosts
indicates that you press the Tab key.
file.
file on the Windows NT 4.0/2000/2003
file provides compatibility with the UNIX
on page 7-10).
/etc/hosts file or equivalent