Setting Passwords - Xerox 2101 Configuration Manual

7
7-2 Administering the Fiery EX2101
For these operations
Controlling the job flow
Job accounting
Maintaining optimal
Fiery EX2101 performance
Troubleshooting
And these tasks
Using Fiery WebTools and the job management tools
For managing job priorities, tracking current jobs,
canceling jobs, printing jobs in the Hold queue, and
reprinting from the Printed or Hold queue
Viewing, printing, and exporting the Job Log, user notes
Setting automatic printing and clearing for the Job Log
Tips
Deleting jobs, clearing queues
Troubleshooting Fiery EX2101 Setup

Setting passwords

Passwords described in this section are not the ones for the Windows XP
N :
OTE
software which you must enter through the FACI when the Fiery EX2101 is started or
rebooted.
For the Server processes, you can set or change the Administrator password from the
Fiery EX2101 Control Panel, and both Administrator and Operator passwords from
local Setup or remote Setup.
When the Fiery EX2101 is installed, there are no passwords. If you do not create
passwords, users are not required to enter a password to modify the Setup or use the
administrator/operator functions in the job management tools. We strongly recommend
that you set at least an Administrator password to protect the Fiery EX2101 from
unauthorized changes to Setup. If a password is set previously, you are required to enter
it when you run Setup or access the job management tools with certain privileges.
For more information, see "Passwords" on page 3-3.
See
Printing Guide
Job Management Guide
Customer Release Notes
Job Management Guide
page 7-11, also
Job Management Guide
Appendix A