Xerox 2101 Configuration Manual page 171

7
7-17 Starting and shutting down the Fiery EX2101
T F EX2101
O SHUT DOWN THE IERY
1. Make sure the Fiery EX2101 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle. If a job has just finished
processing or printing, wait at least five seconds after the Control Panel status message
changes to Idle before proceeding.
If a job from the Print queue is processing, it continues processing and prints
N :
OTE
after the Fiery EX2101 is restarted. If a job to the Direct connection is processing, it
does not finish processing or printing.
2. Press the Menu button to display the Functions menu.
3. Use the down arrow button to scroll to the last screen and choose Shut Down.
4. Use the line selection button to choose Shut Down System.
To turn the Fiery EX2101 back on after you turned it off, wait at least 10 seconds.
!
If you cannot access the Shut down menu to shut down the Fiery EX2101 (for
example, if the Fiery EX2101 stops responding), power off by using the power switch
on the back of the Fiery EX2101 (press 0).