Passwords From The Control Panel - Xerox 2101 Configuration Manual

7
7-3 Setting passwords
T
O CHANGE THE
C
FROM THE ONTROL
PS Setup
Color Setup
Job Log Setup
Change Password
Setup

Passwords from the Control Panel

From the Control Panel, you can set or change only the Administrator password. For
more information on Administrator access privileges, see
controlling print jobs with the job management tools, see the
The Operator password can be set and changed only from local Setup or
N :
OTE
remote Setup.
F EX2101 A
IERY DMINISTRATOR PASSWORD
P
ANEL
1. Scroll through the main Setup menu and choose Change Password.
2. Enter and confirm the password, as described below.
New Password
Use the up and down arrow buttons to select the characters and the left and right
arrow buttons to move between them. Enter characters from left to right, since the left
arrow button is also a Delete key. The password can be any combination of letters and
numbers up to 19 characters. Choose OK when you are done. Be sure to keep track of
the password.
The only way to remove a password that you cannot remember is to reinstall the
N :
OTE
system software.
Verify New Password
Reenter the new password, exactly as you entered it initially. If you make a mistake,
you are prompted to enter the password again. The new password is effective after you
save changes and restart the Fiery EX2101.
page 3-3. For information on
Job Management Guide.