Xerox 2101 Configuration Manual page 161

7
7-7 Managing Fiery Address Books
Administrator subject
Task
field
To retrieve #GetAddressBook
a specific name of address book
address book
For example:
#GetAddressBook Admin
To add an #AddAddressTo
address to name of address book
an address
book
For example:
#AddAddressTo Print
When a print job is submitted via e-mail, the Fiery EX2101 first checks the Print
address book. If the user's e-mail address does not match any entry in the Print address
book, the job does not print. Instead, the user receives an e-mail stating that the print
job was not accepted.
The default wildcard character "@" is stored in the Print address book. This allows any
user to print to the Fiery EX2101 until the administrator adds the first entry in the
Print address book.
The administrator can manage the address books by sending an e-mail to the
Fiery EX2101 with command codes in the subject and message fields. The
Fiery EX2101 responds by e-mail to these commands with information about each
request. When managing address books, see the following table.
Administrator message field
name@domain
or
"display name" <name@domain>
For example:
name1@domain
name2@domain
...
end
Fiery e-mail Fiery e-mail
response subject response message
field
Address Book name List of addresses
of address book in the specified
address book.
For example:
Address Book Admin
Added to Address List of addresses
Book name of address added to the
book address book.
The Fiery EX2101
also lists any
For example:
addresses that
Added to Address
cannot be added
Book Print
and includes the
reason.
field