Receipt Printer; Magnetic Card Reader; Main Control Board - HYOSUNG MX-4000W Operator's Manual

MX-4000W

3.5 Receipt Printer

The receipt printer provides a printed receipt of the customer's transaction. The transaction
information can include the amount of withdrawals, transfers,
the ATM number and location, and other desired information.
After the customer uses the ATM, a printed record of the
transaction information is presented through the appropriate
printer slot.
Basic Specification of Receipt Printer
Direct Line Thermal
203dpi resolution
60mm paper in width used

3.6 Magnetic Card Reader

The dip card reader is a manually operated device mounted
directly to the ATM fascia. The customer inserts an ATM card
in the card entry slot and then removes the card to begin the
transaction.
Basic Specification of Magnetic Card Reader
Dip type Card Reader

3.7 Main Control Board

This motherboard is applied to MX-4000W ATM based on Window CE.
Basic Specification of Control Electronics
S5PC100 834 MHz (ARM Cortex-A8) CPU
SDRAM (256MB), Flash Memory (256 MB)
Operating system: Windows CE 6.0
8 Serial ports supported
Communication: Modem & TCP/IP Selectable
3- 6
3. Hardware Specifications